Circular type vertical lifting parking system (10 floors)-PCS I

Working principle

The shape of the parking system is cylinder or multi prism. The structure can be divided into inner cylinder and outer cylinder. The inner cylinder is the lifting channel which consists of lifter, turntable, layer levelness system and carrier. The outer cylinder is the parking area which is under radiate arrangement. 6-12 car spaces can be set at each floor.

Categories: , Tag:

Description

1) Scope of application: Outdoor multi-level parking system and indoor concrete type well type parking system.

2) Drive mode: Hydraulic pulley driven by large drive ratio. The hydraulic system adopts pump group pumping station. Every pump can become the backup of other pumps. It is low noise, high working and safety.

3) Car exchanging: comb type carrier or tire gripping carrier.

4) Layouts: ground layout, half ground half under underground layout and underground layout.

5) Entrance observation mirror, voice prompts, LED display are equipped.

Parameters

Drive mode hydraulic & wire rope
Car size（L×W×H） ≤5.3m×1.9m×1.55m
≤5.3m×1.9m×2.05m
Car weight ≤2350kg
Motor power & speed Lift 30kw Max 45m/min
Turn 2.2kw 3.0rpm
Carry 1.5kw 40m/min
Operation mode IC card/ key board/ manual
Access mode Forward in, forward out
Power supply 3 phase 5 wires 380V 50Hz

Reviews

There are no reviews yet.

Be the first to review “Circular type vertical lifting parking system (10 floors)-PCS I”

Your email address will not be published. Required fields are marked *